Siemens 175V Adjusting the brightness and contrast, Adjusting size and position, Color monitor

Color monitor 175V

Adjusting the brightness and contrast

You can also set the brightness and contrast using the ! key (brightness) and the " key i (contrast).

You will increase the life of your screen if you adjust the contrast and brightness to medium.

CONTRAST: Increasing or decreasing the contrast between the foreground and background

BRIGHTNESS: Increasing or decreasing the brightness of the background

Adjusting size and position

Horizontal picture position (H-CENTER): Shifting the picture to the left or to the right

Horizontal picture size (H. SIZE): Making the picture narrower or wider

Vertical picture position (V-CENTER): Shifting the picture down or up

Vertical picture size (V-SIZE): Making the picture shorter or longer

Proportional picture size (ZOOM): Increasing or reducing picture size while retaining the side ratios

Setting the picture geometry

Tilt distortion must be set when the screen display is not axially symmetrical.

Pincushion distortion is when the sides of the screen display are bent inward or outward. Trapezoid distortion is when the top or bottom of the screen display is too wide or too narrow. Parallelogram distortion means that the sides of the picture bend to the left or right.

Pincushion distortion (PINCUSHION): Bending the right and left side inward or outward

Trapezoid distortion (TRAPEZOID): Making the bottom edge narrower and the top edge wider or making the top edge narrower and the bottom edge wider

Asymmetrical pincushion distortion (PIN-BALANCE): adjusting right and left side symmetrically

Parallelogram distortion (PARALLELOGRAM): Reducing the angle of the left and right sides

12 - English A26361-K609-Z100-2-5E19