Sierra Monitor Corporation T12020 Model 5100-XX-ITToxic Gas Sensor Module, 3B Set-UpConfiguration

Model 5100-XX-IT Toxic Gas Sensor Module

Gas Range Adjustment Example

M	E	Enter	Range	S.P. Function - Range Adjust	*C
S	T
M	E	Enter	*100 PPM	Select [E] to select or S or T to select another and
S T				press [E]
M	E	Down	10 PPM	Press [E] if selecting 0-10 PPM range
S	T
M	E	Down	USER	Press [E] if selecting User adjustable range
S	T
M	E	Enter	100 PPM	Select [E] to select or S or T to select another and
S T				press [E]
				4-20 mA Adjustment Example
M	E	Enter	Calib	S.P. Function - Calib Adjust	*D
S T
M	E	Enter	Out: 4mA	Use S or T keys to select 4 mA or 20mA
S	T
M	E	Enter	4mA	Selects 4 mA
S	T
M	E	Enter	ACK	Momentary Acknowledge of new Set Point
S	T
M	E	Mode	Calib	S.P. Function - Calib Adjust
S	T
M	E	Down	CalibOut	S.P. Function - Output during Calibration Adjust
S	T
M	E	Enter	Track	Use S or T keys to select Track, Zero, C1.50mA, C4.00mA
S	T
				Track = Output during calibration tracks the calibration gas,
				Zero = Output is Zero during calibration,
				C1.50mA = Output during calibration is 1.50 mA, C4.00mA =
				Output during calibration is 4.0 mA
M	E	Enter	*Track	* = Current selection
S	T
				RS-485 Adjustment Example
M	E	Enter	Address	S.P. Function - RS-485 Address Adjust	*E
S	T
M	E	Enter	Addr:016	Use S or T keys to enter new address
S T
M	E	Enter	ACK	New address selected
S	T
M	E	Enter	Address	S.P. Function - RS-485 Address Adjust
S	T
M	E	Down	Baud	S.P. Function - RS-485 Baud Rate Adjust
S	T
M	E	Enter	*38400	Press [E] to select or [S] or [T] to select another
S T

Table 4-3B Set-Up Configuration

Page: 21