Model
7. APPENDICES
APPENDIX A - SPECIFICATIONS
Sensor type: |
| Electrochemical |
|
| |
|
|
|
|
|
|
| Max. Range | ||||
| User Settings Range |
| |||
| Zero Drift | +/- 0.1% | +/- 1 PPM | +/- 0.5 PPM | +/- 0.5 PPM |
| Repeatability | +/- 0.2% | +/- 1 PPM | +/- 1 PPM | +/- 0.5 PPM |
| Linearity | +/- 0.2% | +/- 1 PPM | +/- 1 PPM | +/- 0.5 PPM |
| Resolution | +/- 0.1% | 0.5 PPM | 0.1 PPM | 0.1 PPM |
| Response Time (1) | <10 sec | <25 sec. | <30 sec. | <60 sec |
| Accuracy | +/- 0.2% | +/- 1 PPM | +/- 0.5 PPM | +/- 0.5 PPM |
| Sensor Life | 2 years | 2 years | 2 years | 2 years |
(1)Response time to 90% full signal value for applied concentration
(2)Sensor life typical for use at standard temperature and pressure with occasional exposure to gas of interest
Output: | Display: |
| Fixed and Scrolling LED |
|
|
| |||
|
|
|
|
|
| ||||
|
| Relays (Optional): | 8 Amp, High Alarm, Low Alarm, 2 Amp Trouble all SPDT | ||||||
|
| Analog Output (Optional) | Analog | ||||||
|
| Signal Output: | Sentry bus |
|
|
| |||
|
|
|
|
| Serial |
| |||
Input: | Remote Alarm Reset: | Normally open digital input (supervised or | |||||||
|
| ||||||||
Electrical Data: | Power consumption: | 2 watts |
|
|
| ||||
|
|
|
|
| |||||
|
| Connection type: | 3 wire |
|
|
| |||
|
| Input voltage: |
| 24 VDC nominal: |
| ||||
Operating Range: |
|
|
|
|
|
| |||
|
|
|
|
|
| ||||
| Ambient Temp (oF) |
| 5 to 122 oF |
|
| ||||
| Ambient Temp (oC) |
|
|
| |||||
| Relative Humidity |
| 5 – 99% | 5 – 99% |
| 5 – 99% |
| 5 – 99% | |
Enclosure: | Material - Standard: | Polyester | |||||||
|
| ||||||||
|
| Material - Stainless Steel Option | 316 Stainless Steel (FM approval pending) |
| |||||
|
| Dimensions: |
| 7.5 x 5.0 x 4.8 inches Al, 7.5 x 5.0 x 4.4 inches SS |
| ||||
|
| (H x W x D) |
| (21.6 x 12.7 x 12.2 cm) |
|
|
| ||
|
| Weight: |
| 2.7 lb. (1.3 Kg) (standard Aluminum enclosure) |
| ||||
|
|
|
|
| 5.4 lb. (2.6 Kg) 316 Stainless Steel |
| |||
|
| Housing: |
| NEMA 4X |
|
|
| ||
Electrical Classification |
|
|
|
|
|
| |||
|
| Performance: |
| Explosion proof, Class 1, Div. I, Groups B, C, D |
| ||||
|
|
|
|
| Class I, Zone 1, groups IIB+H2 IP66 |
| |||
Approvals: | FM Approved |
| Performance and Safety Approval Pending |
|
Page: 29