Siemens 175V manual VESA-DDC-compatible VGA interface, Preset operating modes

Color monitor 175V

VESA-DDC-compatible VGA interface

Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the PC. If your PC is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from your monitor and select the appropriate settings.

i	If the monitor 175V is not yet displayed in the list of monitors, you can select one of the
	following monitors instead:
	Fujitsu Siemens, Siemens or Siemens Nixdorf MCM 173V, MCM 171V, MCM 1510 NTD,
	MCM 1508, MCM 1755, MCM 1503

Preset operating modes

The display position and size have been set to optimum values at the factory for the i operating modes listed above. Depending on the screen controller used, it may be

necessary to adjust the display position and size. In this case, you can change and save the settings (see "Operation of the monitor").

Horizontal frequency	Refresh rate	Screen resolution
31.5 kHz	70 Hz	720 x 400
31.5 kHz	60 Hz	640 x 480
37.8 kHz	100 Hz	720 x 400
43.3 kHz	85 Hz	640 x 480
50.6 kHz	110 Hz	640 x 480
53.7 kHz	85 Hz	800 x 600
60.0 kHz	100 Hz	1024 x 768
63.9 kHz	75 Hz	800 x 600
68.7 kHz	85 Hz	1024 x 768

For ergonomic reasons we recommend a refresh rate of at least 75 Hz and a maximum resolution of 800 x 600 pixels.

16 - English A26361-K609-Z100-2-5E19