Setup
Menu Position
This function sets the display position of the menu.
Select item name “Menu Position” and select the setting contents with the SELECT () buttons.
............. Displays on the left side
............. Displays on the right side
Lamp Mode
Use this if the picture is projected on a small screen and the picture is too bright or when projecting images in dark rooms.
Select the item name “Lamp Mode” and select the setting contents with the SELECT () buttons.
Low ............ The lamp’s brightness is reduced to approximately 80%, extending the
lamp’s service life. (STATUS indicator is green)
Normal ....... The lamp brightness is set to 100% and the screen is bright.
(STATUS indicator is off)
Note:
Frequent switching this mode can degrade the lamp.
STATUS Indicator
STATUS
STANDBY 
DUAL COLOR
MENU
MODE
