![](/images/new-backgrounds/1175188/17518841x1.webp)
Viewing video images (continued)
Setting the aspect ratio
You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the setting according to the type of the input video signal.
How to change the settings:
With the remote control:
1.Press the ASPECT button.
•Every time the ASPECT button is pressed, the aspect mode changes from AUTO to 16:9, to REAL, to FULL, and back to AUTO.
With the FEATURE menu: |
|
|
|
|
|
|
|
|
|
|
|
| |
(See page 23 for menu setting.) |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| opt. |
|
|
|
|
|
|
| ||
1. | Display the FEATURE menu. |
|
|
|
|
|
|
|
|
|
|
|
|
2. | Select ASPECT by pressing the S or T button. | FEATURE |
| ||||||||||
3. | Select your desired aspect ratio by pressing the W or X button. |
|
| ASPECT |
| AUTO | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
When 16:9 is selected.
4.Press the ENTER button.
5.Select your desired position (CENTER, UPPER or LOWER) by pressing the W or X button.
To cancel the menu:
6. Press the MENU button.
Important:
•When a 16:9 image is kept displayed for a long time before displaying 4:3 image, the afterimages of the black bars may appear on the 4:3 image screen. (See page 42.)
When projected images are distorted to a trapezoid:
To correct vertical and horizontal keystone distortion, press the KEYSTONE button on the projector or the remote control to display KEYSTONE, and adjust the image by pressing the X, W, S, or T button (or VOLUME + or - button on the remote control).
In the following cases (for front projection):
Press the X | Press the W | Press the | Press the |
button. | button. | T (or | S (or +) |
|
| button. | button. |
Important:
•You can correct the vertical and horizontal keystones at the same time. However, their adjustment ranges are limited in such correction.
•When the keystone adjustment is carried out, the adjustment value is indicated. Note that this value doesn’t mean a projection angle.
•The allowable range of the adjustment value in the keystone adjustment varies depending on the installation conditions.
•When the keystone adjustment takes effect, the resolution decreases. In addition, stripes may appear or straight lines may bend in images with complicated patterns. They are not due to product malfunctions.
•Noise may appear on the screen during the keystone adjustment because of the type of the video signal being projected and the setting values of the keystone adjustment. In such cases, set the keystone adjustment values in the range where the image is displayed without noise.
•When the keystone adjustment is carried out, the image may not be displayed correctly because of the type of input signal.
•When horizontal and vertical keystone adjustments are performed in combination, the adjustable range becomes narrower than in the case when they are performed separately.
•When the keystone adjustment is performed, the displayed image may be distorted.
•Depending on the installation conditions of the projector and the screen, a perfect rectangular image and the proper aspect ratio may not be obtained.
•In the keystone adjustment with the option lens, the aspect ratio of 4:3 may not be obtained.