Basic connections
This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors.
Important:
•Make sure that the connected device is turned off before starting connection.
•Plug in the projector and the connected devices firmly, and unplug them by holding and pulling out their power plugs, not by pulling the power cords.
•When the projector and the connected devices are located too close to each other, the projected image may be affected by their interference.
•See the owner’s guide of each device for details about their connections.
Projector + AV device
Important:
•Connect the video and audio plugs of the AV cable to the proper terminals matching their colors respectively.
•The
•When the connected AV device uses a BNC connector for its video output, connect it to the VIDEO IN2 (BNC) terminal. When both the VIDEO IN2 (BNC) terminal and the VIDEO IN2 (RCA) terminal are engaged at the same time, the image supplied to the VIDEO IN2 (RCA) terminal takes priority.
Connect either one of these.
VCR, etc.
| To audio output |
To audio input | To video output |
To video input | To |
To |
|
Projector + DVD player or HDTV decoder
Some DVD players have an output connector for
DVD player or HDTV decoder
| AUDIO cable |
CB(PB) Y CR(PR) | to AUDIO OUT |
BNC - RCA connector (option)
B 
G 
R 
R/PR
G/Y
B/PB
To COMPUTER AUDIO IN
•The terminals’ names Y, PB, and PR are examples of a case where a HDTV decoder is connected.
•The terminals’ names are different depending on the connected devices.
•Use
•The image may not be projected correctly with some DVD players.
•When connecting a HDTV decoder having RGB output terminals, set the COMPUTER INPUT to RGB in the SIGNAL menu.
EN – 10
