Mitsubishi Electronics XL30 XL25 SL25 When sRGB is ON, only the main data are effective

10)Menu setting commands (Not executable in stand-by mode, while the Splash screen is projected or the MUTE is executed.)

The menu setting commands are used for the menu setting of this projector. If the personal computer sends the command without attaching the data code, the projector attaches to the received command it’s current setting value as the data code and send it back to the PC.

ITEM	ASCII	HEX				VALUE
CONTRAST *1	P	50h				±30±30±30 (R from G+Main data+B from G)
BRIGHTNESS *1	Q	51h				±30±30±30 (R from G+Main data+B from G)
sRGB	SRGB	53h	52h	47h	42h	0	(OFF), 1 (ON)
COLOR MATRIX (MODE)	CMT	43h	4Dh	54h		1	(VIDEO), 2 (COMPUTER), 3 (USER), 4 (OFF)
COLOR MATRIX (R, G, B)	MRGB	4Dh	52h	47h	42h	±30±30±30 (R+G+B)
COLOR MATRIX (Y, C, M)	MYCM	4Dh	59h	43h	4Dh	±30±30±30 (Y+C+M)
COLOR MATRIX (SATURATION)	MSAT	4Dh	53h	41h	54h	±05
COLOR MATRIX (RGB-TINT)	MT	4Dh	54h			±20
COLOR TEMP.	A	41h				1 (STANDARD), 2 (HIGH), 3 (LOW), 4 (USER)
COLOR	T	54h				±10
TINT	S	53h				±10
SHARPNESS	R	52h				±10
GAMMA MODE	GS	47h	53h			0	(DYNAMIC), 1 (STANDARD), 2 (THEATER), 3 (AUTO)
RIS	AI	41h	49h			0	(OFF), 1 (1), 2 (2), 3 (3)
AUTO POWER ON	APON	41h	50h	4Fh	4Eh	0 (OFF), 1 (ON)
AUTO POWER OFF	APOF	41h	50h	4Fh	46h	00 (OFF) , 05, 10, 15, 30, 60
SPLASH SCREEN	SS	53h	53h			0	(OFF), 1 (ON)
BACK COLOR	BB	42h	42h			0	(BLACK), 1 (BLUE), 2 (LOGO)
MUTE MODE	MM	4Dh	4Dh			0	(BLACK), 1 (LOGO)
LAMP MODE	LM	4Ch	4Dh			0	(STANDARD), 1 (LOW)
IMAGE REVERSE	IR	49h	52h			0 (OFF), 1 (MIRROR), 2 (INVERT), 3 (MIRROR, INVERT)
MENU POSITION	MP	4Dh	50h			0	(Upper left), 1 (Lower right)
EXPAND MODE	EX	45h	58h			1	- 4
FRAME POSITION	FM	46h	4Dh			1	- 5
VIDEO SIGNAL	VS	56h	53h			0	(AUTO), 1 (NTSC), 2 (PAL), 3 (SECAM) ,
						4	(4.43NTSC), 5 (PAL-M), 6 (PAL-N), 7 (PAL-60)
SCART	SRT	53h	52h	54h		0	(OFF), 1 (ON)
ANAMORPHIC	SC	53h	43h			0	(OFF), 1 (CENTER), 2 (UPPER), 3 (LOWER)
3D CineView	LD	4Ch	44h			0	(OFF), 1 (ON)
LANGUAGE	LG	4Ch	47h			0 (		), 1 (English), 2 (Español), 3 (Deutsch) , 4 (Français),
						5 (Italiano),6 ( ), 7 ( ), 8 (			), 9(	)
RESET ALL	RSTALL	52h	53h 54h	41h	4Ch 4Ch
MEMORY CALL	MMC	4Dh	4Dh	43h		0	(AUTO), 1 (USER1), 2 (USER2)
HORIZ. POSITION	HP	48h	50h			+ (increase), – (decrease)
VERT. POSITION	VP	56h	50h			+ (increase), – (decrease)
FINE SYNC.	FN	46h	4Eh			00 - 39
TRACKING	TRK	54h	52h	4Bh		+ (increase), – (decrease)
COMPUTER INPUT	CIN	43h	49h	4Eh		0	(RGB), 1 (YCBCR/YPBPR)
HOLD	HLD	48h	4Ch	44h		0	(AUTO), 1 (ON), 2 (OFF)
HOLD BEGIN	HLB	48h	4Ch	42h		–01 - –99
HOLD END	HLE	48h	4Ch	45h		01 - 99
CLAMP POSITION	CLP	43h	4Ch	50h		00 - 63
CLAMP WIDTH	CLW	43h	4Ch	57h		01 - 63
HORIZ. PIXELS	HPL	48h	50h	4Ch		0000 - 9999
VERT. LINES	VLN	56h	4Ch	4Eh		0000 - 9999
VERT. SYNC.	VSC	56h	53h	43h		0	(AUTO), 1 (ON), 2 (OFF)
SHUTTER (U)	SHU	53h	48h	55h		000 - 383 (000-299 : For SL25U)
SHUTTER (L)	SHL	53h	48h	4Ch		000 - 383 (000-299 : For SL25U)
SHUTTER (LS)	SHLS	53h	48h	4Ch	53h	000 - 510 (000-398 : For SL25U)
SHUTTER (RS)	SHRS	53h	48h	52h	53h	000 - 510 (000-398 : For SL25U)

*1) When sRGB is ON, only the main data are effective.

•Some commands are not executed depending on the input signal. The operational restrictions same as those on the menu setting are applied. Refer to “Menu operation” in the User Manual for more details.

4