Mitsubishi Electronics XL5U Expand Mode .. Choose the mode for enlarging the image. See, All

HOLD

USER

HORIZ. POSITION

VERT. POSITION FINE SYNC. TRACKING

3 FEATURE
					opt.	XGA60
MENU POSITION ... Use to select the position of the menu on the screen, 1.
(upper left) or 2. (lower right).	FEATURE
EXPAND MODE .. Choose the mode for enlarging the image. See page 20.				MENU POSITION		1.
AUDIO MODE ..... Select COMPUTER to output the audio that is input to the
		A		EXPAND MODE		EXPAND
AUDIO IN terminal when COMPUTER is chosen as the
			A
source. Select VIDEO to output the audio that is input to that				AUDIO MODE		COMPUTER
						VIDEO
terminal when VIDEO is chosen as the source. Select				CINEMA MODE		AUTO
COMPUTER VIDEO mode to always output the audio that is
	?			VIDEO SIGNAL		AUTO
input to that terminal. Select MUTE not to output the audio at
				SCART INPUT		OFF
all.
				ANAMORPHIC		OFF
CINEMA MODE .. When AUTO is selected, the film mode will be automatically
				PASSWORD		DISPLAY
activated when a film source signal is inputted. When OFF is				FUNCTION		INPUT
selected, the film mode will not be activated.				LANGUAGE		English
		A Ë
VIDEO SIGNAL ... When AUTO is selected, the appropriate video format is				RESET ALL		OK
automatically selected depending on the input signal. If the
image isn’t displayed correctly, select the desired video format manually.

SCART INPUT ..... Choose ON when connecting the projector with a device equipped with the SCART terminal that

can output RGB signal. SCART terminal is used mainly in Europe. Choose OFF normally. ANAMORPHIC .... Select the desired position from among UPPER, CENTER, and LOWER when playing DVD discs

containing data of letterboxed images.

PASSWORD FUNCTION . Use to change the mode of the password lock or to enable or cancel the password lock. See page 23

for details.
LANGUAGE ........ Use to select the language used in the menu. (					/ English / Español / Deutsch / Français /
Italiano /	/	/	/	)

RESET ALL ......... Use to reset the menu settings (except IMAGE CAPTURE, PASSWORD, and LANGUAGE ).

•CINEMA MODE can be adjusted only when a TV60,480i signal is being displayed.

•When SCART INPUT is set to ON, nothing is output to the external monitor.

•When SCART INPUT is set to ON, normal computer signals aren’t projected.

•Use a SCART-BNC (or SCART-Mini D-SUB 15P) cable (option) when connecting this projector with an AV device equipped with the SCART terminal.

•Some AV devices equipped with the SCART terminal aren’t compatible with this projector.

•When VIDEO SIGNAL is set to AUTO, the image may not be projected with correct colors. Change the setting of VIDEO SIGNAL depending on the input signal in such cases.

•When ANAMORPHIC is set to except OFF, the keystone adjustment ranges are limited.

ENGLISH

4 SIGNAL
HORIZ. POSITION ...	Use to adjust the horizontal position of the image.
VERT. POSITION ...	Use to adjust the vertical position of the image.
FINE SYNC	Use to synchronize the projector with the PC input signal so
	that the image is not blurred.
TRACKING	Use to eliminate image noise such as wide stripes.
COMPUTER INPUT ...	The projector adjusts its settings automatically when
	connected to a DVD player equipped with a component video
	output (Y, CB, CR). When the projector is connected with a
	device having an RGB terminal, choose RGB manually.
HOLD	Use to adjust the image when flagging occurs near the top of
	the screen.

opt.

SIGNAL

COMPUTER

R G B INPUT

R G B

XGA60

0

0

0

0

RGB

ON

OK

5 SIGNAL - USER (No need to adjust in normal use.)
CLAMP POSITION/
CLAMP WIDTH ... Use to correct solid white or solid black in the projected image.	SIGNAL-USER
VERT.SYNC. ........ Use to adjust the image when its motion doesn’t run smoothly.
			CLAMP	0
			POSITION
Select AUTO for normal use.
			CLAMP WIDTH	1
SHUTTER (U) ...... Use to adjust the image when noise appears on the top part of the
image.		?	VERT. SYNC.	AUTO
SHUTTER (L) ...... Use to adjust the image when noise appears on the bottom part of			SHUTTER (U)	0
the image.			SHUTTER (L)	0
SHUTTER (LS) .... Use to adjust the image when noise appears on the left half of the
			SHUTTER (LS)	0
image.
			SHUTTER (RS)	0
SHUTTER (RS) .... Use to adjust the image when noise appears on the right half of
the image.

•If any setting of the SIGNAL-USER menu is changed, the image maynot be displayed correctly. In this case, press the AUTO POSITION button.

Important:

•You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is supplied.

•TV60 and TV50 are equivalent to 480i and 576i respectively. Settings made for one of them apply automatically when its counterpart is supplied.

EN – 17