Menu operation (continued)
1IMAGE
CONTRAST ......... Use to adjust the image contrast. The contrast becomes higher |
|
|
|
|
|
|
|
|
|
|
| opt. |
|
|
| XGA60 | |
as the value increases. |
|
|
|
|
|
|
| |
BRIGHTNESS ..... Use to adjust the image brightness. The image becomes |
|
|
|
|
|
|
|
|
IMAGE |
| |||||||
brighter as the value increases. |
| CONTRAST | 0 | |||||
sRGB .................... Choose ON for projection emphasizing on the color |
| |||||||
| BRIGHTNESS | 0 | ||||||
reproducibility. |
| |||||||
|
|
|
|
|
|
|
| |
• When sRGB is ON, COLOR MATRIX, COLOR TEMP., |
| sRGB | OFF | |||||
COLOR, TINT, and GAMMA MODE can't be adjusted. |
| COLOR MATRIX | COMPUTER | |||||
COLOR MATRIX . Use to adjust the color balance in each color of the image. See |
| COLOR TEMP. | STANDARD | |||||
| ||||||||
page 18. |
| COLOR | 0 | |||||
| ||||||||
COLOR TEMP. .... Use to adjust the color temperature. See page 18. |
| TINT | 0 | |||||
| ||||||||
COLOR ................ Use to adjust the color intensity of the image. |
|
|
|
|
|
|
|
|
| SHARPNESS | 0 | ||||||
TINT .................... Use to adjust the color balance of the image. The color balance |
| |||||||
|
|
|
|
|
|
|
| |
shifts to green as the value increases and shifts to purple as |
| GAMMA MODE | AUTO | |||||
|
|
|
|
|
|
|
| |
the value decreases. (Available only when VIDEO is chosen as |
|
|
|
|
|
|
|
|
the source.) |
|
|
|
|
|
|
|
|
• When the TV50 (PAL, SECAM) signal is input, TINT can't be adjusted.
SHARPNESS ....... Use to adjust the image sharpness. The image becomes sharp as the value increases. (Available only
when VIDEO is chosen as the source.)
GAMMA MODE ... When AUTO is selected, the appropriate gamma mode is automatically selected depending on the input signal. For normal use, select AUTO. Select DYNAMIC for computer sources. Select STANDARD for sport scenes and video sources. Select THEATER for film sources.
2 INSTALLATION |
|
|
| opt. |
|
|
| XGA60 | ||
AUTO POWER ON ...... When ON is chosen, the lamp is automatically lit when the |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
power cord is plugged in the wall outlet. Choose ON when | INSTALLATION |
|
|
| ||||||
using the projector mounted on the ceiling. |
|
| AUTO POWER | OFF | ||||||
|
| ON | ||||||||
• The projector is in the |
|
| AUTO POWER | OFF | ||||||
is off. Use the remote control to turn on the lamp. |
|
| OFF |
|
|
| ||||
|
| IMAGE | SETUP |
|
| |||||
AUTO POWER OFF Use to set the time elapsed before the projector enters the |
|
| CAPTURE |
|
| |||||
|
| SPLASH | ON | |||||||
| ON | |||||||||
|
|
| SCREEN | |||||||
|
|
|
|
|
|
|
|
|
| |
IMAGE CAPTUREUse to capture the screen for the splash screen. See page 21. |
|
| BACK COLOR | BLUE | ||||||
|
| |||||||||
SPLASH SCREEN Choose ON to display the splash screen when the power is |
|
| MUTE MODE | BLACK | ||||||
|
| |||||||||
|
| |||||||||
turned on. |
|
| LAMP MODE | STANDARD | ||||||
• The splash screen can be changed. See page 21. |
|
| IMAGE | OFF | ||||||
BACK COLOR ...... Use to select the background from among BLUE, BLACK and |
|
| REVERSE |
|
|
| ||||
|
|
|
|
|
|
|
|
|
| |
IMAGE, which will be displayed when there is no signal input from the source. When IMAGE is selected, the splash screen will be displayed.
MUTE MODE ...... Use to choose the background, either BLACK, or IMAGE, which will be displayed when the MUTE
button is pressed. When IMAGE is chosen, the splash screen will be displayed.
LAMP MODE ....... Use to change the brightness of the lamp. When LOW is chosen, the lamp brightness is kept low
and the volume of the operation sound is reduced, resulting in a longer lamp replacement interval.
•The STANDARD LAMP MODE is activated by default whenever the projector is turned on. When the LOW LAMP MODE has been chosen, the default STANDARD LAMP MODE is switched to the LOW lamp mode in 1.5 minutes.
•When the LAMP MODE is switched, the projected image may flicker. This is not a
product malfunction.
For XL5U only
•You can fix the LAMP MODE to LOW.
How to fix the LAMP MODE to LOW
In
How to cancel the fixed LAMP MODE
In
Important:
• Within 10 seconds after the STATUS lamp is lit, do not unplig the power cord nor turn the POWER button to ON.
IMAGE REVERSE .. Use to reverse the projected image. Select MIRROR for rear projection with the
•When you continue projection for a long time with BACK COLOR or MUTE MODE set to IMAGE, an after- image may persist on the screen.
•Do not change the setting of LAMP MODE frequently.
•You can’t set IMAGE CAPTURE or SPLASH SCREEN when PASSWORD FUNCTION in the FEATURE menu has been set to SPLASH ID SCREEN to enable the password lock.
EN – 16
