Mitsubishi Electronics XL6U user manual Basic connections, Projector + AV device

Basic connections

This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors.

Important:

•Make sure that the connected device is turned off before starting connection.

•Plug in the power cords of the projector and the connected devices firmly. When unplugging, hold and pull the plug. Do not pull the cord.

•When the projector and the connected devices are located too close to each other, the projected image may be affected by their interference.

•See the owner’s guide of each device for details about its connections.

Projector + AV device

S-VIDEO IN

VIDEO IN

AUDIO IN

to audio output

to video output to S-video output

VCR, etc

Important:

•Match the colors of the video and audio plugs on the AV cable with those of the terminals.

•Speaker output is mono.

•Set AUDIO MODE in the FEATURE menu to VIDEO to hear the audio only when the input source is VIDEO. (See page 17.)

Projector + DVD player or HDTV decoder

Some DVD players have an output connector for 3-line fitting (Y, CB, CR). When connecting such DVD player with this projector, use the COMPUTER/COMPONENT VIDEO IN terminal.

DVD player or HDTV decoder
				AUDIO cable (option)
Y		CB(PB) CR(PR)		to audio output
				AUDIO IN
				BNC-RCA connector (option)
			No connection
G	B	R	HD/CS	VD

Mini D-SUB 15P-BNC

conversion cable (optional)

Important:

COMPUTER/COMPONENT

VIDEO IN

•The terminals’ names Y, PB, and PR are given as examples of when a HDTV decoder is connected.

•The terminals’ names vary depending on the connected devices.

•Use a Mini D-SUB 15P-BNC conversion cable for connection.

•Image may not be projected correctly with some DVD players.

•When connecting a HDTV decoder having RGB output terminals, set COMPUTER INPUT to RGB in the SIGNAL menu.

•Speaker output is mono.

EN – 10