Projector + Computer
RGB cable for PC
ENGLISH
Computer
| COMPUTER/COMPONENT |
to audio input | VIDEO IN |
|
Audio cable (option)
to monitor port
AUDIO OUT
AUDIO IN
COMPUTER/ COMPONENT VIDEO OUT
Important:
AUDIO OUTto PC audio
MONITOR OUTPUT | output | PC audio cable (option) |
RGB cable for PC (option)
Necessary when outputting to both a PC monitor and the projector.
•When you use a longer RGB cable instead of the provided cable, the image quality may deteriorate.
•Some computers require additional connectors or analog RGB output adapters to be connected with this projector. Contact your dealer for further information.
•This projector uses a stereo pin jack for its audio input. Check the type of the audio output terminal of the connected computer and prepare a proper cable for connection. Some computers don’t have the audio output terminal.
•Speaker output is mono.
•Set AUDIO MODE in the FEATURE menu to COMPUTER to hear the audio only when the input source is COMPUTER. (See page 17.)
•When the audio cable is connected to the AUDIO OUT terminal, the speaker output is muted.
For Macintosh
•If your Macintosh has no video port, a monitor output adapter is required. Contact your dealer for further information.
•Some Macintoshes require a MAC adapter for the RGB cable for connection with this projector. Contact your dealer for further information.
About DDC™
The COMPUTER/COMPONENT VIDEO
•After connecting a computer supporting this standard to this terminal, plug the power cord of the projector in the wall outlet first, and then boot up the computer.
•You may need to install the DDC driver, depending on the computer you use. In this case, you need to download the driver from our Web site. Contact your dealer or Mitsubishi sales office for further information.
EN – 11
