Basic connections
This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors.
Important:
•Make sure that the connected device is turned off before starting connection.
•Plug in the power cords of the projector and the connected devices firmly. When unplugging, hold and pull the plug. Do not pull the cord.
•When the projector and the connected devices are located too close to each other, the projected image may be affected by their interference.
•See the owner’s guide of each device for details about its connections.
Projector + AV device
AUDIO IN
VIDEO IN
to video output
to audio output
VCR, etc
to
Important:
•Match the colors of the video and audio plugs on the AV cable with those of the terminals.
•Speaker output is mono.
•Set AUDIO MODE in the FEATURE menu to VIDEO to hear the audio only when the input source is VIDEO. (See page 17.)
Projector + DVD player or HDTV decoder
Some DVD players have an output connector for
DVD player or HDTV decoder
AUDIO cable
to audio output
Y CB(PB) CR(PR)
AUDIO IN
BNC - RCA connector (optional)
No connection
G | B | R | HD/CS | VD |
|
|
Mini 
conversion cable (optional)
Important:
COMPUTER IN
•The terminals’ names Y, PB, and PR are given as examples of when a HDTV decoder is connected.
•The terminals’ names vary depending on the connected devices.
•Use a Mini
•Image may not be projected correctly with some DVD players.
•When connecting a HDTV decoder having RGB output terminals, set COMPUTER INPUT to RGB in the SIGNAL menu.
•Speaker output is mono.
EN – 10
