![](/images/new-backgrounds/1269124/26912411x1.webp)
Preparing your projector
Checking accessories
The following accessories are provided with this projector. Check to be sure that all of the accessories are packed in the package.
Cables
Mini
Mini
RGB cable for PC
•Used for projector control by computer.
Power supply parts
Power cord for US
Remote control parts
Remote control | R6 |
battery (two) |
Others
•Lens cap (attached to the projector)
•Terminal cover
•Lamp replacement tray
•CD-ROM
•Safety Manual/Quick Start up
Important:
• The attached power cords are to be used exclusively for this product. Never use them for other products.
Inserting the batteries into the remote control
1 | 1. | Remove the rear lid of the remote control. |
2. | Check the polarity (+), | |
| 3 | correctly, inserting their |
|
| • If the battery is inserted from the (+) side first, inserting |
|
| the |
|
| on the battery side. If the battery is forced to insert in |
| 2 | this way, the outer label of the battery may get ripped |
| and it may cause a | |
|
| |
| 3. | Attach the rear lid. |
| Important: | |
| • | Use two |
| • | Replace the 2 batteries with new ones when the remote |
|
| control is slow to operate. |
Removing the batteries from the remote control Remove the back lid of the remote control and take out the batteries.
Caution:
•Use of a battery of wrong type may cause explosion.
•Only
•Dispose of used batteries according to your local regulations.
•Batteries may explode if misused. Do not recharge, disassemble, or dispose of them in fire.
•Be sure to handle the batteries according to the instructions.
•Load the batteries with its positive (+) and negative
•Keep batteries out of reach of children and pets.
•Remove the batteries, if the remote control is not used for a long time.
•Do not combine a new battery with an old one.
•If the solution of batteries comes in contact with your skin or clothes, rinse with water. If the solution comes in contact with your eyes, rinse them with water and then consult your doctor.