Mitsumi electronic XD3500U Adjusting projected images, Color Enhancer, About color temperature

Adjusting projected images (continued)

To cancel the menu:

7. Press the MENU button.

To enable the stored color temperature:

1. Set COLOR TEMP. to USER in the QUICK MENU or set it to USER in the IMAGE menu.

About color temperature

There are different kinds of white color. Color temperature is a way to show the differences in white. White of which temperature is low appears reddish. When the color temperature rises, white appears bluish. For example, you can change the color temperature using the following procedures.

To raise the color temperature: Increase the CONTRAST B (blue) and decrease the CONTRAST R (red).

To reduce the color temperature: Decrease the CONTRAST B (blue) and increase the CONTRAST R (red).

•If you set all of CONTRAST R, G, and B to negative values, the original brightness of the image can’t be obtained even when you maximize CONTRAST in the IMAGE menu.

Color Enhancer

You can set the user-defined balance between the brightness and hue using the menu. (See page 26 for menu
setting.)
	COLOR	AUTO
With the IMAGE menu:	ENHANCER

1.	Display the IMAGE menu.		COLOR ENHANCER–USER
2.	Select COLOR ENHANCER by pressing the S or T button.
				GAMMA MODE	DYNAMIC
3.	Select USER	by pressing the W or X button.
				BrilliantColorTM	2
4.	Press the ENTER button.
				RGB–COLOR	0
5.	Select an item you want to set by pressing the S or T button.
				RGB–TINT	0

GAMMA mode

Use this item to set the gamma optimally.

DYNAMIC ……Select when viewing images supplied from the computer.

NATURAL ……Select when viewing images supplied from the video device.

DETAIL ………Select when viewing images of which brightness should be kept relatively low, such as movies and

music performance.

BrilliantColor™

Use this item to make the colors having medium brightness such as yellow and skin tone look natural. Press the W button to decrease the value to lessen the effect. Press the X button to increase the value to heighten the effect. (BrilliantColor™ doesn’t work at value 0.)

6. Select a setting value by pressing the W or X button.

•For more enhanced color reproduction, set BrilliantColor™ to 0. The white portion of the color wheel will be disabled and you can reproduce true-to-life images.

RGB-COLOR

Use to adjust the color intensity of the projected image. Every time the X button is pressed, the color becomes thicker. Every time the W button is pressed, the color becomes lighter.

RGB-TINT

Use to adjust the color balance of the projected image. Every time the X button is pressed, the image appears more greenish. Every time the W button is pressed, the image appears more reddish.

Important:

• You can adjust Color Enhancer also by pressing the CE button on the remote control.

With the remote control:

1.Press the CE button on the remote control.

A window for color enhancer adjustment appears on the upper right of the screen.

2.Press the W or X button to select USER .

3.Press the ENTER button.

4.Press the S or T button to select GAMMA MODE, BrilliantColor™, RGB-COLOR or RGB-TINT.

5.Press the W or X button to adjust the selected item.

EN-34