Advanced features
Setting of the image displayed during startup or muting
You can display your desired image as the startup screen (or splash screen). Using the menu, you can also use such image as a background that is displayed while the video is muted or no signal is supplied.
•You can capture the images from the COMPUTER1, COMPUTER2, DVI, and HDMI input sources.
Setting procedure
1.Display your desired image.
2.Display the INSTALLATION menu.
3.Select IMAGE CAPTURE by pressing the S or T button.
opt.
INSTALLATION
|
| LAMP MODE |
| STANDARD | ||
|
|
|
|
|
| |
|
| STANDBY MODE |
| STANDARD | ||
|
|
| ||||
|
|
|
|
|
|
|
|
| AUTO POWER | OFF | |||
|
| ON |
| |||
|
|
|
|
|
|
|
|
| AUTO POWER | OFF | |||
|
| OFF |
|
|
|
|
|
|
|
|
|
| |
|
| IMAGE CAPTURE |
| GO |
|
|
|
|
|
| |||
4.Press the ENTER button.
•Image capture starts and the captured image is displayed.
•Once you press the ENTER button, you cannot use other functions until the capturing completes.
•When the resolution of the captured image is lower than XGA, the image is enlarged to XGA when displayed.
•When the resolution of the captured image is higher than XGA, only the portion within the XGA range is captured.
Important:
•Images with complicated patterns may not be captured. In such cases, change the image to be captured.
•Some images can’t be captured correctly because of their signal type. For details, see page 51.
•You can’t change the new startup screen back to the original startup screen. (Even when you select RESET ALL in the FEATURE menu, the factory default screen isn’t available any longer.) When you want to change the startup screen again, capture another image.
•The captured image will be displayed from the next startup. If the captured image isn’t displayed, make sure that the setting of SPLASH SCREEN in the INSTALLATION menu isn’t OFF. (See page 30.)
•To display the captured image while the video is muted, set AV MUTE MODE in the INSTALLATION menu to IMAGE. (See page 30.)
•To display the captured image while no signal is supplied, set BACK COLOR in the INSTALLATION menu to IMAGE. (See page 30.)
•In the mute mode, or when no signal is input, it takes longer time to display the captured image.
•You can’t set IMAGE CAPTURE when PASSWORD FUNCTION in the FEATURE menu has been set to SPLASH ID SCREEN to enable the password lock.
