Mobility Electronics PS6U1UPE manual Setting up the MC3000

InVision USB-Peripheral to Ethernet Adapter User Guide

Setting up the MC3000

Setting up your PS6U1UPE is easy and includes only these simple steps.

1.Connect the USB Mini-A to Mini-B Adapter Cable (PN 170373-000)to the MC3000 cradle and to the PS6U1UPE, as shown below.

2.Connect the Power Supply (PN 170140-000),if you have one, as shown below. The power supply is not required because the PS6U1UPE can draw power directly from the MC3000.

3.Connect the Ethernet Cable to the network (see the Section “Connecting the PS6U1UPE to your Network” for more information)

The PS6U1UPE is provided without a power supply or any USB adapter cables. Since the MC50 uses a different cable than the MC3000, and the MC3000 doesn’t require a power supply, each peripheral device is provided separately to ensure you don’t have to buy items you cannot use.

To purchase a cable or power supply, contact Mobility.

If you have any questions regarding requirements or availability, please contact Mobility.

Mobility Electronics, Inc 6