Moffat E311 Cleaning Guidelines, Always Turn Off The Power Supply Before Cleaning, Exterior

Cleaning

Cleaning Guidelines

Caution:

ALWAYS TURN OFF THE POWER SUPPLY BEFORE CLEANING.

THIS UNIT IS NOT WATER PROOF.

DO NOT USE WATER JET SPRAY TO CLEAN INTERIOR OR EXTERIOR OF THIS UNIT.

Exterior

Clean with a good quality stainless steel cleaning compound. Harsh abrasive cleaners may damage the surface.

Interior

Ensure that the oven chamber is cool. Do not use wire brushes, steel wool or other abrasive materials. Clean the oven regularly with a good quality oven cleaner. Take care not to damage the fan or the tube at the right side of the oven which controls the thermostat.

Oven Racks

To remove, slide out to the stop position, raise the front edge up, and lift out.

Side Racks

Undo the thumbscrew (anti-clockwise rotation) securing rack to oven wall, swing rack towards centre of oven to disengage location pin at front of side, and pull rack forward to remove. To replace, engage rack in rear holes, swing towards side of oven to engage in front hole, and replace thumbscrew.

Bottom Element Cover

Lift out vitreous enamelled element cover and thoroughly clean on a routine basis (minimum once per week.

Fan Baffle

To remove, unscrew the oven lamp glass and lift the baffle out. To replace, locate the bottom edge of the baffle over the bottom element terminal plate and secure in place with the oven lamp glass.

Do not over tighten lamp glass.

Oven Seals

To remove, hold at their centre point and pull forward until they unclip. Remove side seals first, then top and bottom. The seals may be washed in the sink, but take care not to cut or damage them.

To replace, have the lip facing the oven opening. Fit the top and bottom seals first, then the side seals.

Oven Door Glass

Clean with conventional glass cleaners

13