Moffat MDW 542 Something not working, Fault code / malfunction, Possible cause, Solution

Models: MDW 542

1 28
Download 28 pages 39.02 Kb
Page 17
Image 17
Something not working

Something not working

IMPORTANT!

The dishwasher will not start or stops during operation.

Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer.

Open the door and carry out the following suggested corrective actions.

Fault code / malfunction

Possible cause

Solution

The dishwasher does not fill with

The water tap is blocked or furred

Clean the water tap.

with limescale.

 

water.

 

 

 

The water tap is turned off.

Turn the water tap on.

- continuous flashing of the

The filter (where present) in the .

Clean the filter in the.

start/cancel indicator light

threaded hose fitting at the water

threaded hose fitting.

 

- 1 intermittent audible signal

inlet valve is blocked.

 

- 1 flash of the "end of

The water inlet hose has not been

Check the water inlet hose

correctly laid or it is bent or

connection.

programme" indicator light

squashed.

 

 

 

The dishwasher will not drain.

The sink spigot is blocked.

Clean out the sink spigot.

- continuous flashing of the

The water drain hose has not been

Check the water drain hose

start/cancel indicator light

- 2 intermittent audible signals

correctly laid or it is bent or

connection.

squashed.

 

- 2 flashes of the "end of

 

 

 

programme" indicator light

 

 

 

The dishwasher door has not been

Close the door

 

properly closed.

 

The programme does not start.

The main plug is not plugged in.

Insert the mains plug

 

 

 

 

 

The fuse has blown in the household

Replace the fuse.

 

fuse box.

 

 

 

 

Once these checks have been carried out; press the Programme/Cancel button and close the door. The programme will continue from the point at which it was interrupted. If the malfunction or fault code reappears contact the Service Force Centre.

For other combinations of fault codes not described in the above chart, please contact your Service Force Centre.

IMPORTANT!

When carrying out the suggested corrective actions the appliance must be switched off.

17

Page 17
Image 17
Moffat MDW 542 Something not working, Fault code / malfunction, Possible cause, Solution, continuous flashing of the