S c a n n i n g B a r C o d e s
Scanning bar codes is application specific. You should only scan a bar code when prompted by your application.
1.Point the scanner at a slight angle approximately four to eight inches from the bar code symbol.
Scanner
button
located on
rubber
grip
2.You can press either button (on the left and right side of the printer) or both buttons at the same time
instead of using the button on the handheld.
Scanning buttons are identified by the 
symbol.
3.If the bar code does not scan, see “Scanning Tips.” For more information about using the scanner, cleaning the scanner, and scanner safety, refer to your handheld owner’s manual.
Scanner Information
The scanner is certified to be a Class II laser product with the United States DHHS Center for Devices and Radiological Health. The scanner emits less than 1.0 milliwatt beam of laser light from the scanning window.
CAUTION
Laser light - Do Not stare into the
beam.
Using the Printer
