Using the Optional Stand
Read the following if you purchased the optional printer stand. The stand can be
♦used on a table top or
♦adjusted to minimize glare on the handheld’s display
♦folded flat for storage.
For a Table Top:
1.Place the stand on the table top.
2.Unfold the stand and lock into place with the wire bar.
3.Slide the printer into the stand until the button catches in the stand.
The button must be attached to the
printer.
4.Adjust the height of the stand by moving the wire bar into different grooves if you notice glare on the handheld’s display.
Button catches here
Wire Bar
Specifications
