C L E A N I N G | 4 |
|
|
You may need to clean the printhead and platen roller after printing approximately six rolls of supply, whenever you load new supplies, or when you see voids in the print as shown.
CAUTION
Do not use sharp objects to clean the
printhead. This may damage the printer and require a service charge.
1.Open the supply cover by inserting your fingers into the rubber pull tab and pulling up firmly on the supply cover.
2.Remove the supply roll (when cleaning the printhead).
3.Moisten a cotton swab with isopropyl alcohol and clean the printhead as shown.
Printhead
Cleaning
