Monarch 6037 manual

GOLD

1. Charge the main battery. Use either the Monarch® 9462™ or 9464™

battery charger. See the documentation for those chargers.

Important: You must charge the main battery before using it. For optimal

battery life, charge the battery

within three months of receipt

See the

Equipment Manual

for important battery safety

information.

2. Insert the main battery and the backup battery (if needed) in the printer.

A backup battery is already installed in the printer and ready to use.

3. Attach the safety strap found in the documentation package.

4. Load supplies in the printer.

5. Turn on the printer. Your System Administrator must have already

loaded an application in the printer before you can use it.

1. Turn the printer upside down, resting its top on the table.

2. Take the thin end of the safety strap, and push it

through the loop at the bottom of the printer handle

(near the battery compartment).

3. Push the thick end of the safety

strap through the thin end��s

loop.

4. Pull the strap. It may be

necessary to help the thin

end’s loop fit over the

plastic piece in the middle of the strap.

5. Pull the strap tight.