4 Quick Reference
Loading for Non-Peel Mode
A. Feed the supply under the applicator roller
and over the label deflector.
B. Close the supply cover completely.
C. Press ESC to exit.
Loading for Peel Mode
A. Peel and discard the first four inches of labels from the backing paper.
B. Hold the printer upright and gently press
down on the label deflector. (It may be
stiff.)
C. Feed all four inches of the backing paper
over the peel bar and under the
applicator roller and the label deflector.
D. Push the label deflector up until it snaps
into place.
E. Partially close the cover to the first
position.
F. Pull the backing paper over the guide
roller, down to the pinch and feed rollers.
G. Hold the backing paper edge between the
feed and pinch rollers, and press the
trigger.
H. Close the cover and press ESC to exit.
Label
Deflector
Applicator
Roller
Label
Deflector
Peel Bar
Applicator
Roller
Label
Deflector
Feed Roller
(Behind Pinch
Roller
)
Guide Roller
(behind
su
pp
l
y
)
Pinch Roller