2 Quick Reference
Important: Take the main battery out of the
printer when storing the printer.
1. Turn the printer over and press the button on
the battery compartment door (at the bottom
of the printer’s handle) and slide it open (the
door stays attached).
2. Turn the printer upright, holding your palm
beneath the open battery compartment. Hit
the printer on your hand and catch the
battery as it slides out.
3. Remove the backup battery, if one is already
installed, by turning it slightly
counterclockwise, and pulling it out.
4. At the same angle, place the new battery
(positive side facing away from the main
battery) at the edge of the track under the
spring contact. As you push it in, it will
straighten itself. Make sure the battery lays
flat.
5. Insert a new main battery (non-ribbed end
first).
6. Immediately replace a fully charged main
battery.
7. Slide the compartment door shut. You will have to press the main
battery in slightly so the door fits over it. When the door shuts, you
hear it click into place.
8. Turn on the printer and wait for it to completely initialize.
9. Turn off the printer again.
Important: The last two steps will help avoid reducing the coin cell life.
Main
Battery
Battery
Compartment
Door
Button
Backup
Battery