6 Quick Reference
1. Turn off the printer and open the supply
cover.
2. Remove the supplies.
3. Clean the black mark sensor with a dry
cotton swab.
4. Reload the supplies and close the supply
cover.
Cleaning the On-Demand Sensor 1. Turn off the printer and open the supply
cover.
2. Remove the supplies.
3. Open the label deflector.
4. Clean the on-demand sensor with a soft
cloth moistened with water.
5. Reload the supplies and close the label
deflector and supply cover.
1. Turn off the printer.
2. Open the supply cover completely.
3. Open the label deflector.
4. Remove the supplies.
5. Carefully remove any jammed supply and close the deflector. Do Not
pull the jammed supply out through the front of the label deflector. Do
Not use sharp objects to remove jammed supplies.
6. Remove the extra supply between the pinch and feed rollers.
7. Reload the supplies and close the label deflector.
Cleaning the Platen Roller Clean the platen roller when you see significant adhesive build-up or a label
is wrapped around the platen roller.
1. Turn off the printer and open the supply cover.
2. Remove the supplies.
3. Hold the printer upright and gently press down on the label deflector. It
may be stiff.
Black Mark
Sensor
On-Demand
Sensor