Monessen Hearth C2801VF, C2804VF, C2802VF Getting Started, Make Sure You Have Received All Parts

GETTING STARTED

MAKE SURE YOU HAVE RECEIVED ALL PARTS:

Check your packing list to verify that all listed parts have been received. You should have the following:

•Cast Iron Stove with Burner Assembly

•Installation/Operating Instructions

•Ceramic fiber logs

•Four (4) Leg Levelers

•Touch-up Paint

Millivolt controlled heater designed to be operated with optional devices for ON/OFF functions.

•Hand-Held Remote with Receiver, Manual or Thermostat

•Wall Switch with 15' Wire

•Wall T-stat with15' Wire

•Stove Mounted Thermostat Control

CAUTION

Handle the gas log burner assembly by the grate only. Do not pick the unit up by the burners.

Gloves are recommended when handling ceramic fiber logs to prevent skin irritation from loose fibers. Logs are fragile--handle with care.

Carefully inspect the contents for shipping damage. If any parts are missing or damaged, immediately inform the dealer from whom you purchased the appliance. Do not attempt to install any part of the appliance unless you have all parts in good condition.

WHAT YOU WILL NEED FOR INSTALLATION:

You must have the following items available before proceeding with installation:

•External regulator (for propane/L.P.G.) or high pressure natural gas (1 to 2 PSI system)

•Piping which complies with local codes

•Pipe sealant approved for use with propane/L.P.G. (Resistant to sulfur compounds)

•Manual shutoff valve

•Sediment trap (recommended)

•Tee joint

•Pipe wrench or appropriate wrench set

•Screwdrivers

6 45D0080