Monessen Hearth DBX24C* manual Manual Control Lighting Instructions, To Turn OFF GAS to Heater

Models: DBX24C*

1 44
Download 44 pages 45.38 Kb
Page 30
Image 30

OPERATING INSTRUCTIONS

MANUAL CONTROL LIGHTING INSTRUCTIONS

1.STOP! Read the safety information.

2.Make sure the manual shutoff valve is fully open.

3.This heater is equipped with an ignition device (piezo) which automatically lights the pilot.

4.See Figure 43, page 29 for the location of the piezo ignitor and control knob. Push in gas control knob slightly

and turn control knob clockwise to the OFF position.

NOTE: Knob cannot be turned to OFF unless knob is pushed in slightly. Do not force.

5.Wait 5 minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas STOP! Follow the instructions under What To do if You Smell Gas, page 29. If you do not smell gas, go to the next step.

6.From OFF position, push in gas control knob slightly and turn counterclockwise to the IGN posi- tion. See Figure 45. Push in and hold control knob for 5 seconds.

NOTE: If you are running the heater for the first time, it will be necessary to press in the control knob for 30 seconds to allow air to bleed out of the gas piping.

7.With the control knob pushed in, push and release the piezo ignitor button to light the ODS pilot. The pilot is located behind the left front log and the left side of the burner. If piezo ignitor does not light the pilot, see Match Lighting Instructions, page 33.

8.Hold the control knob in for an additional 10 seconds to prevent the ODS pilot from shutting off the gas while the thermocouple is warming up.

9.Release the control knob.

If the knob does not pop out when released, stop and immediately call your service technician or gas sup- plier.

If the ODS pilot will not stay lit after several tries, push and turn the gas control knob clockwise to OFF and wait 15 seconds. Repeat steps 6 through 9.

10.Push in control knob and turn counterclockwise to the HIGH setting. At this location the control knob will pop out when positioned correctly. The knob can now be positioned at any position between HIGH and LOW. Refer to Figures 46 and 47.

Rotate

Rotate

Rotate

 

Push

Push

Push

Figure 45 - IGN Position

Figure 46 - HIGH Position

Figure 47 - LOW Position

WARNING

Wait 30 seconds before readjusting the heater when the control knob has been turned down to a lower setting.

TO TURN OFF GAS TO HEATER

1.Turn control knob clockwise to OFF position to completely shut off the heater.

2.If applicable: Turn off all electric power to the heater.

30

33D4047

Page 30
Image 30
Monessen Hearth DBX24C* manual Manual Control Lighting Instructions, To Turn OFF GAS to Heater

DBX24C* specifications

The Monessen Hearth DBX24C* is a distinguished direct vent gas fireplace designed to provide warmth, aesthetics, and versatility for modern homes. With a focus on efficiency and style, the DBX24C* stands out in the market for its combination of innovative technology and classic fireplace charm.

One of the main features of the DBX24C* is its impressive heating output. This fireplace operates efficiently to produce a maximum of 24,000 BTUs, making it suitable for heating larger spaces while maintaining a balanced and comfortable ambiance. The direct venting system enhances its efficiency by drawing in air from outside, ensuring that indoor air quality remains uncompromised while also minimizing heat loss.

The design of the DBX24C* is another pivotal characteristic. Available in various finishes, including sleek black and contemporary stainless steel, it can complement a range of interior decors. Its clean-face design eliminates the need for a traditional fireplace mantle, allowing for a more modern look that highlights the fire's radiant glow. The minimalist aesthetics also allow for flexible installation options, making it an ideal choice for both new homes and renovations.

In terms of technology, the Monessen DBX24C* boasts a modern control system, allowing for easy adjustments to flame height and heat output. The remote control capability enhances convenience, letting users control the fireplace from the comfort of their seating area. Additionally, the unit is equipped with an electronic ignition system, which ensures swift and reliable startup while also providing added safety through its on-demand control.

Burning clean with natural gas or propane, the DBX24C* is designed with environmental consciousness in mind. Its high-efficiency operation exceeds industry standards, resulting in lower emissions and reduced environmental impact. This makes the DBX24C* not only an aesthetically pleasing choice but also an eco-friendly one.

Overall, the Monessen Hearth DBX24C* delivers an exceptional combination of performance, design, and technology. With impressive heating capacity, sleek aesthetics, remote control functionality, and commitment to environmental friendliness, it offers homeowners a reliable and attractive solution for heating and enhancing their living spaces. Whether you are looking to upgrade an existing fireplace or install a new one, the DBX24C* stands as a premier option in the world of gas fireplaces.