LOG INSTALLATION | 11 |
|
|
Position logs and twigs onto burner as shown in Figure 8.
FIGURE 8
TOP VIEW OF
LOGS AND TWIGS.
Apply ember material near the grate bars as shown in Figure 9.
FIGURE 9
TOP VIEW - FRONT LOG AND GRATE BARS
TYPICAL BOTH SIDES
FOR PENINSULA AND
SPECIAL EMBER MATERIAL PROVIDED MAY BE PLACED BETWEEN FRONT PORTING AND GRATE BARS WITH A RECOMMENDED 3/8" SPACING FREE OF EMBER MATERIAL DIRECTLY IN FRONT OF THE FRONT BURNER PORTS AS SHOWN FOR BEST PERFORMANCE AND EFFECT. BLOCKAGE OF THE BURNER PORTS MAY CREATE INCREASED SOOT AND CARBON BUILDUP.
NOTE:
3/8" TO FURTHER ENHANCE THE HEARTH LAVA ROCK MATERIAL MAY BE PLACED ON THE HEARTH PAN AREA TO SIMULATE ASHES. LAVA ROCK MUST NOT BE PLACED ON TOP OF THE BURNER. ONLY ROCKWOOD IS PERMITTED
IN THE BURNER FLAME.
PORTING
EMBER MATERIAL
Curing Instructions
Note: When lit for the first time the fireplace may emit a slight odor for several hours. This is due to the curing and "burn in" of external parts and lubricants used in the manufacturing process. This condition is temporary. Open doors and window to ventilate the room(s) sufficiently.
53D9019. Rev 3 11/07