PRODUCT FEATURES
WARNING
Do not attempt to burn solid wood fuels, vented gas log sets, or any other combustible in this unvented firebox. Also, do not install a
The MCUF36D and MCUF42D Series are
Do not alter or modify the firebox or its components under any circumstances. Any modification or alteration of the firebox system, including but not limited to the firebox and accessories, may void the warranty, listings and approvals of this system and could result in an unsafe and potentially dangerous installation.
BEFORE YOU START
Carefully inspect the contents for shipping damage. If any parts are missing or damaged, immediately inform the dealer from whom you purchased the appliance. Do not attempt to install any part of the appliance unless you have all the parts in good condition.
MAKE SURE YOU HAVE RECEIVED ALL PARTS
Check your packing list to verify that all listed parts have been received. You should have the following:
1. | 4. Five (5) sheet metal screws for canopy |
2.Canopy
3.Installation and Operating Instructions
WHAT YOU WILL NEED FOR INSTALLATION
TOOLS |
| BUILDING SUPPLIES | |
• | Phillips screwdriver | • Square | • Framing materials |
• | Hammer | • Piping complying with local codes | • Wall finishing materials |
• Saw and / or sabersaw | • Tee joint | • Caulking material (noncombustible) | |
• | Level | • Pipe wrench | • Fireplace surround materials (noncombustible) |
• | Measuring tape | • Pliers |
|
• Electric drill and bits | • Pipe sealant approved for use with propane/L.P.G. (resistant to sulfur compounds) | ||
Refer to the installation instructions provided with the log sets for items required for log set installation.
NOTICE
Illustrations shown in this manual reflect “typical” installations with nominal dimensions and are for design and framing reference only. Actual installations may vary due to individual design preferences. However, always maintain minimum clearances to combustible materials and do not violate any specific installation requirements.
26D4720 | 5 |
