IMPORTANT SAFETY INFORMATION

Continued from page 3

16.Keep room area clear and free from combustible materi- als, gasoline and other flammable vapors and liquids.

17.Unvented gas heaters are a supplemental zone heater. They are not intended to be a primary heating appli- ance.

18.Unvented gas heaters emit moisture into the living area. In most homes of average construction, this does not pose a problem. In houses of extremely tight construction, additional mechanical ventilation is recommended.

19.During manufacturing, fabricating and shipping, various components of this appliance are treated with certain oils, films or bonding agents. These chemicals are not harmful but may produce annoying smoke and smells as they are burned off during the initial operation of the appliance; possibly causing headaches, or eye or lung irritation. This is a normal and temporary occurrence.

The initial break-in operation should last two to three hours with the burner at the highest setting. Provide maximum ventilation by opening windows or doors to allow odors to dissipate. Any odors remaining after this initial break-in period will be slight and will disappear with continued use.

20.Input ratings are shown in BTU per hour and are for elevations up to 2,000 feet. For elevations above 2,000 feet, input ratings should be reduced 4 percent for each 1,000 feet above sea level. Refer to the National Fuel Gas Code.

21.The appliance and its appliance main gas valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig (3.5 kPa).

22.The appliance must be isolated from the gas supply piping system by closing its equipment shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.5 kPa).

23.Do not use this room heater if any part has been under water. Immediately call a qualified service technician to inspect the room heater and to replace any part of the control system and any gas control which has been under water.

24.Never burn solid fuels in a fireplace where a unvented room heater is installed.

25.Always have a fireplace screen in place when the appli- ance is in operation, and unless other provisions for combustion air are provided, the screen shall have an opening(s) for induction of combustion air.

26.Do not fill spaces around the firebox with insulation or other materials. These spaces must be maintained to pre- vent the firebox from coming in contact with combustible materials.

We suggest that our gas hearth products be installed and serviced by professionals who are certified in the U.S. by the National Fireplace Institute® (NFI) as Gas Specialists.

www.nficertified.org

 

 

 

WARNING

Never connect unit to private

 

 

 

 

(non-utility) gas wells. This

 

 

gas is commonly known as

 

 

wellhead gas.

 

 

 

4

26D4720

Page 3 Page 5
Page 4
Image 4
Monessen Hearth MCUF42D SERIES dimensions Never connect unit to private
Page 3 Page 5

MCUF42D SERIES specifications

The Monessen Hearth MCUF42D Series is a remarkable line of fireplaces designed to offer both functionality and elegance, perfect for any modern home. These units are built to provide efficient heating while maintaining a sleek and stylish aesthetic. One of the standout features of the MCUF42D series is its heat output capacity, designed to ensure that even large spaces are effectively warmed. With a powerful heat output of up to 40,000 BTUs, the MCUF42D can easily become the central heating source for a living area.

One notable technology incorporated in the MCUF42D series is its advanced combustion system. This system enhances fuel efficiency, allowing the fireplace to burn cleaner and produce fewer emissions. This not only benefits the environment but also contributes to lower heating costs for homeowners. Additionally, the series is designed with a high-efficiency rating, which means that it maximizes the heat produced from every unit of fuel consumed.

Aesthetically, the MCUF42D series does not compromise on style. It features a contemporary design that appeals to modern sensibilities, with options for various finishes and trims. Homeowners can customize their fireplaces with different front styles, such as traditional doors or a sleek modern face. The generous viewing area of the fireplace, framed by elegant glass doors, provides a beautiful view of the flames, creating an inviting atmosphere in any room.

Another outstanding characteristic of the MCUF42D series is the ease of installation. The unit is engineered for flexible venting options, allowing it to be installed in a variety of settings, whether it's a new or existing structure. This adaptability makes it an ideal choice for renovations or new builds.

Furthermore, the MCUF42D series incorporates features for ease of use and safety. The remote control operation allows users to adjust the heat settings and flames at their convenience, offering modern functionality. Safety features such as tempered glass doors and an automatic shut-off system provide peace of mind for families.

In summary, the Monessen Hearth MCUF42D series combines powerful heating capabilities, advanced technology, and stylish design. With its efficient performance and customizable options, it stands out as an excellent choice for those looking to enhance their living space with a contemporary fireplace that warms the home while elevating its aesthetic appeal.
Top Page Image Contents