Monessen Hearth PL20 Log Placement, Parlor Vent Free Fireplace, log #1. Figure, 90D0093

LOG PLACEMENT Parlor Vent Free Fireplace

LOG PLACEMENT

Log #1

1.Place Log #1 on burner by aligning notches on bottom side of each end of log with the rear corners of the burner. The light fixture should partially set in cutout of rear log. Ensure log is sitting firmly on burner and is locked in where it cannot slide forward on the burner. Figure 19

Figure 19 -

Place Log #1

LG719

2. Place Log #2 on burner by aligning hole in bottom
of log with pin located at front of burner. Gently	Log #2
push log down until it comes in contact with burner.
Push top of log towards rear placing the rectangular
notch on log #2 onto the rectangular protrusion on
log #1. Figure 20

Figure 20 -

Place Log #2

LG720

90D0093 19