Monessen Hearth SWB400I Congratulations, Table Of Contents, Listing And Code Approvals

Models: SWB400I

1 40
Download 40 pages 42.07 Kb
Page 2
Image 2
CONGRATULATIONS!

CONGRATULATIONS!

You have chosen a fine woodburning fireplace. Your fireplace has been designed and built for years of heating and viewing enjoyment. Please take time to read this entire manual before installing or operating your fireplace.

TABLE OF CONTENTS

 

LISTING AND CODE APPROVALS

2

CAUTIONARY INFORMATION

3

OPERATION GUIDELINES

4

CLEARANCES

5

FIREPLACE LOCATION

7

INSTALLATION PREPARATION

8

FLOOR PROTECTION

10

FIREPLACE COMPONENTS

12

FIREPLACE INSTALLATION

14

CHIMNEY INSTALLATION

15

CHIMNEY OFFSET INSTALLATION

17

CHIMNEY OFFSET AND CAP INSTALLATION

18

CHIMNEY CAP INSTALLATION

19

CHIMNEY HEIGHT AND OFFSET CHARTS

20

CHIMNEY CAP CHASE INSTALLATION

21

OUTSIDE COMBUSTION AIR PRECAUTIONS & RECOMMENDATIONS

22

COMBUSTION AIR ASSEMBLY

24

GAS APPLIANCE INSTALLATION

24

TRIM INSTALLATION

26

GLASS DOOR INSTALLATION AND FAN ACCESSORY

28

FIREPLACE OPERATION

29

MAINTENANCE AND SAFETY

31

PARTS DIAGRAM AND LIST

34

LIMITED WARRANTY

36

LISTING AND CODE APPROVALS

The instructions contained in this manual provide the information necessary to install this fireplace in accordance with Underwriter’s Laboratories requirements and in compliance with the National Fire Protection Association Standard No.

211.Some codes may require the fireplace and chimney be electrically grounded. Before beginning the installation, you should check with local building officials to obtain required permits and assure compliance with local regulations and coded. If you encounter problems with code requirements, contact your dealer for assistance.

This fireplace is listed by OMNI-Test Laboratories, Inc. to U.L. 127-standard for factory-built fireplaces. The design of this fireplace and these instructions complied with applicable safety standard for a factory built fireplace in effect at the time the fireplace was manufactured. You should be aware, however, that failure to install, operate, and maintain this or any other factory built fireplace properly can result in a house fire or other occurences that could cause deaths, injuries, and property damages. It is very important that the persons installing and/or supervising the installation of this fireplace have appropriate skills in using the tools and techniques required: and reading and comprehension skills sufficient to read and follow these instructions. These instructions contain warnings, cautions, and notes to emphasize important safety information. To assure that safe and satisfactory service is received from this fireplace, please read the following special notices and all the contents of this manual.

2

53D9033. Rev 1 03/03

Page 2
Image 2
Monessen Hearth SWB400I instruction manual Congratulations, Table Of Contents, Listing And Code Approvals