Monitor Audio GS LCR owner manual Fixing Your GS FX to a Wall

Models: GS FX GS LCR

1 16
Download 16 pages 59.64 Kb
Page 11
Image 11
Fixing Your GS FX to a Wall

Fixing Your GS FX to a Wall

CAUTION: You will need to determine where the GS FX will be fixed and the structure of the wall. For safety reasons, if you are unsure of your

ability to provide a secure and safe fixing, do not attempt to fix these speakers to your wall, please obtain the services of a competent qualified trades person.

CAUTION: Ensure that there are no water pipes or electricity cables running behind where the wall brackets are going to be secured. Work from secure steps and avoid trailing wires.

The GS FX comes with a pressed steel plate that secures to the wall and then the cabinet is hung on it. The plate, has elongated holes for easy adjustment to ensure it is perfectly square. To fix your GS FX’s to the wall, follow these simple instructions. We would recommend using the wall fixing template enclosed within the packaging carton:

1.When you are sure of the location of your GS FX, mark on the wall the centres of the securing screws. These should be 175mm (6 7/8“) apart. Please use the template to mark the centres.

2a. For fixing to plasterboard (sheet-rock) or a solid wall use a suitable 7mm (1/4”) drill bit. Drill the two positions (each speaker) deep enough to accept the enclosed wall plugs. This should be approx 45mm (1 3⁄4”). Insert the wall plugs, a hammer may be required to insert them completely into the wall. Hold the plate against the wall, lined up with your holes, and start to screw the provided self tapping screws into the wall. Align the plate so that it is square. Ensure that the screws are tight against the plate, and do not turn freely.

2b. For fixing to a timber wall, drill a pilot hole (approx 2 - 3mm or 1/16 – 1/8 ”) and screw the self tapping screws into the pilot hole. Align the plate so that it is square. Ensure that the screws are tight against the plate, and do not turn freely.

NOTE: You can use further fixing points along the slots if you desire.

3.Hang your GS FX on to the fixing plate and sit back and enjoy.

For recommendations on where to hang your GS FX please refer to the FAQ’s on our web site: www.monitoraudio.co.uk

9.

© Monitor Audio Ltd 2005

 

 

V2

Page 11
Image 11
Monitor Audio GS LCR owner manual Fixing Your GS FX to a Wall