Monster Cable PRO 3600 owner manual Troubleshooting, Symptom, Possible Cause, Remedy

TROUBLESHOOTING

Symptom	Possible Cause	Remedy
The PRO 3600 PowerCenter is	The PRO 3600 PowerCenter	• Turn the PRO 3600 PowerCenter switch on.
not receiving power.	is not turned On.	• Make sure the PRO 3600 PowerCenter’s
		AC power plug is plugged into a properly
		grounded 120 volts (nominal) wall outlet.
		• In some households, a wall switch may need
		to be thrown to make the wall plug active.
		Try turning on the light switches located
		near the wall unit.
	Too many devices are	• Press the PRO 3600 PowerCenter Thermal
	connected, causing an	Circuit Breaker button in to reset.
	overload, tripping the	Please allow 10 minutes before attempting
	Thermal Circuit Breaker.	to reset. If you reset too soon, the breaker
		will prematurely sense power overload
		and not allow unit to operate.
		• If the Circuit Breaker continues to trip,
		try moving one or more components
		to another PRO 3600 PowerCenter.
		You may be drawing too much current
		through one PRO 3600 PowerCenter.

17