19
Attach glass by locating dimples in light kit and aligning it with the groves in glass and twisting clockwise till tight.
20
Align holes in fan with light kit and use the allen wrench furnished to tighen the 6 screws.
21
Align the canopy with the holes in fan and use the furnished allen wrench to tighten the 6 screws if you decide not to use the light kit.
22
Remove cover by snaping off from top or bottom. Install 23A 12V bat- tery into wall remote.
23
Attach cover of remote by placing over buttons and snaping into place.
24
Install wall control unit to outlet box using machine screws provided.
25
Attach front cover to wall control with screws provided.
26 |
|
Fan speed | Light dimmer |
control but- | |
tons | for lights |
Fan on / off | Fan reverse |
button |
To control fan speed select from High, Medium or low speed buttons. To turn the fan off press the Fan on / off button. To dim lights press and hold button. To turn off light press and quickly release button. Press button marked REV to reverse the rotation direction of the fan blades
