19
Install remote receiver by sliding into opening in the Mounting bracket. Make sure that the dip switches on the Transmitter and the Receiver are set to the same position. See Fig 34 for remote operation
22
Lift canopy to ceiling aligning the key hole slots with the screws on the bottom of the mounting bracket. Rotate the canopy counter clockwise to lock in place. Tighten the screws to secure the canopy. See inset for keyhole shape
25
Loosen 2 screws and remove 1 screw. Save screw removed.
28
Attach glass by locating dimples in light kit with the groves in glass and twisting clockwise till tight.
| 20 |
|
|
|
|
|
| Fan |
|
| House | |||
|
|
|
|
|
|
|
|
| ||||||
| fuses |
|
|
|
| white |
| white | ||||||
|
|
|
|
|
|
|
|
|
| black |
|
| ||
|
|
|
|
|
|
|
|
|
| orange |
| black | ||
|
|
|
|
|
|
|
|
|
|
| blue | Green | ||
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Make wiring connections as indicated above. White from fan to white from remote marked N. Orange from fan to Orange from remote marked Light/up. Blue from fan to blue from remote marked down light. Black from fan to Black from remote marked L. White from house to white from remote marked AC N . Black from house to Black from remote marked AC L. Connect all green ground wires to Ground wire from House.
23
Match round decorative plates with holes in blades before attaching blade arms to blades using the blade arm screws and washers provided.
26
Twist lower cover plate into place by twisting in direction of arrow. Replace 1 screw removed and tighten all 3 screws securely.
29
Attach glass by locating dimples in light kit with the groves in glass and twisting clockwise till tight.
21
Make wire connections to power source using wire nuts provided. Make sure that no filiments are outside of the wirenut. After making the wire connections, the wires should be spread apart with the grounded conductor and the
24
Attach blade assembly to motor and tighten screws securely using screws, washers, and motor pads in hardware pack.
27
Install 60 watt bulb with E17 socket.
30
Remove cover by snaping off from top or bottom. Install 12V battery into wall remote. Duracell MN21 / Eveready A23 / GP 23A all 12V.
