31
Twist lower cover plate into place by twisting in direction of arrow. Replace 1 screw removed and tighten all 3 screws securely.
34
Place light kit over screws and twist direction of arrow into place. Then tighten all 3 screws securely.
37
Install finial cap and tighten in direc- tion of arrow.
40
Install wall control unit to outlet box using machine screws provided.
32
Loosen 3 screw on light plate as shown.
35
Install 3 x 40 watt incandescent can- delabra bulbs.
38
Remove cover by snaping off from top or bottom. Install 12V battery into wall remote. Duracell MN21 / Eveready A23 / GP 23A all 12V.
41
Attach front cover to wall control with screws provided.
33
Plug white wire from fan to white wire from light kit. Then plug black wire from fan to black wire from light kit.
36
Install cage with glass onto light kit, install rubber washer and hex nut to hold in place and tighten in direction of arrow.
39
Attach cover of remote by placing over buttons and snaping into place.
42
Light dim- mer for up and down lights
Fan reverse button
To control fan speed select from High, Medium or low speed buttons. To turn the fan off press the Fan on / off button. To dim upper lights press and hold U/L botton. To dim Lower lights press and hold D/L button. To turn off either up or down light press and quickly release either U/L or D/L button. Press button marked REV to reverse the rotation direction of the fan blades