Morphy Richards Compact Food Processor manual Using the citrus press, Dismantling after use

Slicing, and grating plates

1With the processor bowl already fitted,

place the slicing or grating plates into the plate holding disc. The plates should be placed into the disc as shown and clicked into place. (will only fit one way)

2Place the plate holding disc onto the shaft (with the thinner end at the top) onto the

central drive shaft of the bowl and check that it is firmly fixed in place.

3Holding the cover by the feed tube, fit

the cover by rotating clockwise. Ensure that the safety interlocks have clicked into place. (see setting up the processor)

4Plug in the processor.

PLEASE NOTE: When using these discs, never introduce the fingers into the feed tube. Always use the food pusher.

Using the citrus press

1With the empty processor bowl locked in

place, drop the strainer into the top of the proces-

sor bowl.

2	Turn the strainer clockwise until the
	strainer locks		Safety interlock
	into the safety
	interlock.
	A click will be
	heard.
3	Drop the citrus
	press drive
	gear	onto

the drive shaft.

4Drop the small citrus press

into the citrus press support

post .

5If the large

citrus press is required drop the large citrus press over the small citrus press.

6Plug in the processor and select the

speed required.

Dismantling after use

1Unplug the processor.

2Remove the processor bowl cover by turning anti-clockwise.

3Carefully remove the blade/disc and shaft/citrus juicer. Remember - the metal tools are very sharp.

4Unlock and remove the processor bowl.

5