43550 Filter kettle Rev 5 21/3/05 3:03 PM Page 5
Replacing electronic cartridge reminder
When the cartridge reminder is due for renewal it can easily be removed.
1Pull both tabs upwards and lift out the cartridge reminder. H
2To refit your new cartridge reminder, slot tabs into the lugs provided and click into place.
Telephone our replacement parts
helpline for your new cartridge reminder.
Switching on
You do not need to wait until the water has filtered through before boiling. Your Morphy Richards filter kettle, will boil and filter at the same time giving you boiled, filtered water quickly.
•Boil only as much water as you need as this saves electricity.
1Place the filter kettle on the base unit,
ensuring the kettle locates on to the 360˚ connector.
•The 360˚ connector allows the kettle to be located at any position, - ideal for left and right handed users and convenient
positioning on worktop.
2Plug in and switch on at the wall socket.
3 Switch the filter kettle on. The ‘power on’ neon, will light up.
H
4When the water boils the filter kettle will switch off automatically.
•If you are using the kettle for the first time, discard the water and repeat once more.
•To
•If you do not put in enough water, or switch on the filter kettle when it is empty, the safety
element to cool, then use as normal.
5Lift the filter kettle from the base unit by the handle ensuring you hold the kettle level.
WARNING: Unless the cartridge
holder is fitted correctly, the filter kettle may not operate correctly and the lid may not close and lock securely.
When to change your cartridge
This depends on water quality and the improvement required. We recommend that you change your cartridge after 1 month.
The electronic reminder on your Morphy Richards water filter system will remind you when to change your cartridge.
5
