Chapter 6: Certification and Safety Information
This equipment is marked to show compliance with the European R&TTE
directive 1999/5/EC and that National restrictions apply.
The relevant Declaration of Conformity can be found at
http://motorola.canopywireless.com/doc.php
Annex 6 – Instructions for use (regulatory content) MOTOMESH 2.4/5.8 GHz Radio European Union Notification
The CE mark is the official marking required by the European Community for all Electric and
Electronic equipment that will be sold, or put into service for the first time, anywhere in the
European community. It proves to the buyer or uses that this product fulfills all essential
safety and environmental requirements as they are defined in the European Directives.
The 2.4GHz/5.8GHz product range marked with the following CE marks,
&
1321
Carry the alert symbol to denote the product is not suitable for deployment in all EU
member states. Products marked with both these CE numbers are only suitable for use in
the following EU member states: -
• Ireland
• Norway
• UK
The CE mark acknowledges that the product is in compliance with regulations of the
European Radio & Telecommunications Terminal Equipment (R&TTE) directive 1999/5/EC
and other relevant directives. See section Declaration of Conformity section (found later in
this chapter) with the applicable directives.
Note: This product only operates in the following channels (20MHz channel size) in the
5.8GHz band.
Channel
Number Frequency (MHz)
149 5745
153 5765
157 5785
161 58051
1For use in the UK, Republic of Ireland, and Norway, the frequency range 5795-5815 MHZ
shall not be used and should be notched out to protect RTTT devices. Users must therefore
6-5