VSuite 2.1 | User Guide |
Calling a Name or Number
Use the Call command to place a call. If the number you want to call is stored in your contact list, you can say the contact name and, optionally, which number (home, mobile, etc.) you want to call. If the number is not in your contact list, you can say the number itself.
fTo call a name or number:
1.Start VSuite.
You hear “Say a command.”
2.Say “Call” or…
Say “Call” followed by the name of a person in your contact list, and optionally, the number location (home, work, mobile, etc.) to call or…
Say “Call” followed by a valid telephone number.
Examples
Call Angela Martinez
Call Tom Stewart at Work
Call Donna Harper’s Mobile
Call 781
3.After you say a name or number, you might be prompted
“Did you say, ‘Call…?’” followed by the first of up to three names or numbers.
- 6 -
