Troubleshooting
If you encounter problems with your Dolphin QuadCharger, refer to chart below for possible solutions. If problems persist, please contact HHP Technical Support.
Problem | Issue | |
|
| |
The “CHARGING” LED does not come on | Check the power connections on the | |
when I insert a battery pack into the | Dolphin QuadCharger. Also check to | |
ensure the POWER switch is ON and the | ||
Dolphin QuadCharger | ||
battery pack is properly seated. | ||
| ||
| Try to charge the battery in one of the | |
| other charging pockets. If the red Status | |
The red status LED comes on during | LED comes on again, then the problem is | |
associated with the battery pack. If the red | ||
charging. | ||
status stays with the charging pocket, the | ||
| ||
| problem is associated with the charging | |
| circuity. | |
| An error occurred during the self- | |
| diagnostic test for that particular charging | |
The red status LED remains on without a | pocket. Call HHP Product Service and | |
battery in the charging pocket. | request an RMA. See Chapter 9 for | |
| additional warranty and return | |
| information. | |
|
|
7 - 4
