Viewing the VMM Configuration Tab as a Normal User | Motorola 3.1

Mesh Enabled AccessVehicle Mounted Modem Users Guide

Mesh Enabled AccessVehicle Mounted Modem Users Guide

VMM Device Administration Page Fields (Administrator / Super User Login)

	Field Name	Field Description	Field Default Value
	System Name	This is the name of the device as shown by	Assigned by
		MeshManager	Network
			Administrator
	RDATE Server IP	The IP address of the RDATE server. This is	172.31.0.20
	Address	usually the MiSC when operating in
		infrastructure mode. The RDATE server
		provides the current date to the VMM. The
		VMM can operate without an RDATE server.
	Wired Interface	The VMM will tell the attached Ethernet devices	MAC-derived
	Address	to use this address for the default gateway, and
		the VMM will use the address when accessing
		the local Ethernet segment.
	Wired Interface	This is the subnet mask for the local Ethernet	255.255.0.0
	Subnet Mask	segment.
	DHCP Lease Time	This is the duration (in seconds) of the DHCP	300
		leases that the VMM offers to the attached
		Ethernet devices.
	Device Priority	The Device Priority provisioning area allows the	Levels	0-7	are
		operator to set the priority assigned to wireless	available,	based	on
		messages transmitted by this device. A priority	your configuration as
		of 7 is the highest priority setting.	set by the Network
			Administrator
	Geo Settings	The Geo Settings area allows the operator to	Reporting Interval is
		enable and disable the Geo Reporting feature	set to 10 seconds.
		(if provisioned), as well as control the
		frequency of reports and provision the
		destination server to which those Geo reports
		will be sent. Requires entry of the primary Map
		server’s IP address. The secondary Map
		address is optional.

The External Device Provisioning frame of this web page is described in Section 3.5.

3.2.5.2Viewing the VMM Configuration Tab as a Normal User

A similar screen will be displayed for the Access account (the web page will indicate Normal User Login). Normal users can change only those settings for which they have system privileges.

13

Image 21

Motorola 3.1 Viewing the VMM Configuration Tab as a Normal User, Mesh Enabled AccessVehicle Mounted Modem Users Guide

Contents

Documentation Revision MEA 3.1 Vehicle Mounted Modem Users GuidePage VMM Users Guide Mesh Enabled AccessCopyrights DisclaimerPage DEVICE INSTALLATION Table of ContentsDEVICE CONFIGURATION Mesh Enabled AccessVMM Users Guide CUSTOMER SERVICE INFORMATION DEVICE MAINTENANCESetting User Supplied IP Addresses Changing the Web Interface Password Regulatory and RF Safety Exposure WARRANTY INFORMATIONREGULATORY INFORMATION Return Material Request MEA Device Administration Home Page Normal User Login MEA Device Administration Home Page Super User LoginVMM Configuration Page Normal User Account Configuration Change Dialog 1 Product Introduction 1.1 Product Contents 2 Device Installation 2.1 Software Requirements2.2 Equipment Requirements 2.3.1 MAC Address Table 2.3 MAC Address Label LocationMAC Address Table MAC Address 00-05-12-0A-xx-yy 2.4 VMM6300 Assembly Information 2.5 Installing the VMM6300 DeviceFigure 2-1. VMM External Connection Point 2.5.1 Deployment Considerations 2.6 Testing the Device Installation2.5.1.1 Deployment Tips Figure 2-2. VMM6300 Trunk Mounting 5. Right-click on the device MAC address and select the Ping option 3.2 Accessing the MEA Device Administration Web Pages 3 Device Configuration3.2.1 Administrator and Access Account Information 3.1 IP Addressing Considerations 3.2.1.1 Password Information Administrator PasswordAccess User Password Figure 3-2. MEA Device Administration Redirecting Web Page 3.2.2 Viewing MEA Device Administration Redirect Page Figure 3-3. MEA Device Administration Home Page Super User Login 3.2.3 Viewing MEA Device Administration Home Page as an Administrator Figure 3-4. MEA Device Administration Home Page Normal User Login 3.2.4 Viewing MEA Device Administration Home Page as a Normal User 3.2.5.1 Viewing the VMM Configuration Tab as an Administrator 3.2.5 VMM Device Administration Configuration Tab Mesh Enabled AccessVehicle Mounted Modem Users Guide 3.2.5.2 Viewing the VMM Configuration Tab as a Normal UserField Default Value Wired Interface Figure 3-6. VMM Configuration Page Normal User Account 3.2.6 VMM Device Administration Geo Position Tab 3.3 Device Addressing Schemes 3.3.1 Network DHCP Scheme 3.3.2 Statically Provisioned Scheme3.3.3 User Supplied Scheme Figure 3-8. Configuration Change Dialog 3.4 Setting User Supplied IP Addresses Figure 3-9. System Update Save Completed Web Page Figure 3-10. External Device Provisioning Table 3.5 External Device Provisioning 3.5.1 Connecting to the Ethernet Port 3.6 Working with MeshTrayselect Programs Æ mea Æ MeshTray.exe Figure 3-11. MeshTray Status Tab VMM 3.6.1 MeshTray Status Information 3.6.3 MeshTray Authentication Activity 3.6.2 MeshTray Security TabFigure 3-12. MeshTray Security Tab VMM Figure 3-13. MeshTray Authentication Activity tab VMM 4 Device Maintenance 4.1 Changing the Web Interface PasswordFigure 4-1. Enter New Password Web Page Figure 4-3. Password Changed Confirmation Web Page Figure 4-2. Confirm Changes Window for Enter New Password 4.2 Upgrading the Device Firmware Figure 4-4. Update Device Firmware Web Page Figure 4-5. Confirm Upload Window for Firmware Update Figure 4-6. Firmware Upload Progress Web PageOnce the filename has been confirmed, the web browser will transmit the file to the device, and the device will present an upgrade progress screen. This page will indicate the current stage in the upgrade process 4.3.1 Provision Username Section 4.3 Security Provisioning Web Page4.3.2 Provision Groupname Section Figure 4-7. Security Provisioning Web Page Figure 4-8. Device Reset Prompt Web Page 4.4 Resetting the VMM via the Device Administration Web Page Figure 4-9. Device Reset in Progress Page 4.5.1 Recovering from VMM Reset-to-Default in User-Supplied Mode 4.5 Restoring Factory Settings - User Supplied Mode Limitations4.5.1.1 Resetting Device Addressing Mode Using Device Manager 4.5.1.2 Resetting Device Addressing Mode via Configuration Web Page Figure 4-10. Restore Factory Settings Web Page 4.6 Restoring Factory Settings - Normal Operations Figure 4-12. Factory Settings Restored Web Page Figure 4-11. Confirm Changes Window for Restore Factory SettingsThe Factory Settings Restored page will be displayed Click on the Finished button to complete the reset procedure Europe 5 Customer Service InformationEmail essc@motorola.com Asia and Pacific Region 5.1 Obtaining Support 5.2.1 Radio Products and Services Division5.2 Return Material Request 5.1.1 System Information 5.2.1.1 Radio Products and Services Division Telephone Numbers 5.2.2 Returning System Components to Motorola5.2.3 Returning FREs 6 Warranty Information P Loading of software upgrades or fixes into the devices G Batteries they carry their own separate limited warrantyB Defects or damage from misuse, accident, water, or neglect F Product which has had the serial number removed or made illegible equipment or software not furnished by Motorola which is attached to or used in connection with the Product. The foregoing states the entire liability of Motorola with respect to infringement of patents by the Product or any its parts thereof 7 Regulatory Information 7.3 Regulatory and RF Safety Exposure7.1 FCC Information 7.2 FCC RF Energy Exposure Statement Ministry of Health Canada Safety Code 6. Limits of Human Exposure to RF Exposure Compliance and Guidelines Operating Instructions