Motorola 6806800C44B manual SaAmfSUsperSIRankTabl

Compliance ReportIntroduction

Table 1-2 Compliance Table - Availability Service, SAI-AIS Volume 2: Availability Management Framework (continued)

	Section	Description	Support	Notes
	3.7.4	N-Way Redundancy	Yes	SIs based on saAmfSIRank
		Model		are assigned to SU based on
				saAmfSUsperSIRankTabl
				e till all the SIs are assigned
				an active assignment. Then
				each SI based on
				saAmfSIRank is assigned
				fully to SUs as standby before
				the next SI is assigned as
				standby. When an SU fails
				and the system is in a
				degraded state, AvSv may
				ignore the
				saAmfCompNumMaxActive
				Csi attribute of a component
				and assign more active
				assignments than the
				permitted number. This policy
				has been adopted to maintain
				service continuity for as many
				SIs as possible even when
				the system is in a degraded
				state.
	3.7.5	N-Way Active	Yes	AvSv assigns an SI to SU
		Redundancy Model		only after the SI with better
				saAmfSIRank is fully
				assigned.
	3.7.6	No Redundancy Model	Yes
	3.7.7	The Effect of	Yes
		Administrative
		Operations on Service
		Instance Assignments
	3.8	Component Capability	Yes
		Model and Service
		Group Redundancy
		Model
	3.9	Dependencies Among	Yes	Constituent sub-sections that
		SIs, Component Service		are only partially supported
		Instances, and		or not supported are
		Components		mentioned below. Note that
				the rest of the sub-sections
				are fully supported.
	3.9.1.1	Dependencies Between	No
		SIs when Assigning a
		Service Unit Active for a
		Service Instance
	3.9.1.2	Impact of Disabling a	No
		Service Instance on the
		Dependent Service
		Instances
Availability Service Programmer’s Reference (6806800C44B)				19