Motorola 6806800C44B manual Admin lock

admin lock Management Interface

To reset a node gracefully.

hardreset

To reset a node abruptly.

Shelf-Type

The shelf type of the chassis in Shelf-Id. Default value: 23

Blade-Type

The type of blade in Slot-Id. Default value: 7.

Blade-Type

The type of blade in Subslot-Id.

Example

The following example commands illustrate the usage of this command.

[reset /2/9/ operation softreset

This command resets the node on chassis 2, physical slot 9.

Users can also issue this command as:

reset /2/9 operation softreset /23/7

This would reset the node on chassis 2, physical slot 9, shelf type 23, and blade type 7.

Note that the default entity types are supported only for shelf-type and first blade-type, i.e., 23 for shelf and 7 for blade. If there is a valid entry in the Subslot-Id, then users have to provide all the three entity types at the end.

2.3.3admin lock

Description

This command locks or unlocks the node at the location mentioned within.

Three operations are supported: shutdown, lock, and unlock.

In the case of shutdown, applications are failed over and then shut down gracefully. The AvM deactivates the relevant blade gracefully using an HPI command and sets the state of the blade to "locked" The blade can then be brought up only when an administrator performs an explicit "unlock" operation. Shutdown cannot be performed on active system manager hosts.

In the case of a lock operation, the AvM deactivates the blade abruptly using an HPI command and sets the state of the blade to "locked" The blade cannot then be brought up unless an administrator performs an "unlock" operation.

An "unlock" operation is performed to bring up a blade that has been locked because of a shutdown or lock operation.

Availability Service Programmer’s Reference (6806800C44B) 31