Linksys SRW224G4P Snmp Notification Recipient, Admin User Authentication, SNMPv1,2, SNMPv3

Chapter 5 Configuring the Switch

SNMP > Notification Recipient

SNMP > Notification Recipient

Recipient IP  IP address of a new management station to receive notification messages..

NotificationType  Notifications are sent as traps or inform messages.. The informs option is only available for version 2c and 3 hosts.. (Default: Traps are used)

SNMPv1,2

Community String  Specifies a valid community string for the new trap manager entry.. (Range: 1-32 characters, case sensitive)

Notification Version  Indicates if the user is running SNMP v1 or v2c.. (Default: v1)

SNMPv3

User Name  The name of user connecting to the SNMP agent.. (Range: 1-32 characters)

Security Level  When trap version 3 is selected, you must specify one of the following security levels.. (Default: noAuthNoPriv)

•noAuthNoPriv  There is no authentication or encryption used in SNMP communications.. (This is the default for SNMPv3..)

•AuthNoPriv  SNMP communications use authentication, but the data is not encrypted (only available for the SNMPv3 security model)..

•AuthPriv  SNMP communications use both authentication and encryption (only available for the SNMPv3 security model)..

UDP Port  Specifies the UDP port number used by the trap manager..

Timeout  The number of seconds to wait for an acknowledgment before resending an inform message.. (Range: 0-2147483647 centiseconds; Default: 1500 centiseconds)

Retry times  The maximum number of times to resend an inform message if the recipient does not acknowledge receipt.. (Range: 0-255; Default: 3)

Admin

The Admin tab provides access to system administration settings and tools.. It includes the following screens:

Admin > User Authentication

Admin > User Authentication

The Switch supports up to 6 user names and passwords for management access (console and web interfaces).. The default user name is “admin” with no password.. You should therefore assign a new password for the “admin” user account and store it in a safe place.. The default “admin” account cannot be deleted from the system..

As well as the default “admin” account, up to five other user-defined accounts can be created on the Switch.. To create a new user account, enter a user name and password up to eight characters long, confirm the password, and then click Add..

To change the password for a specific user, select the user name from the list, enter the new password, confirm the password by entering it again, and then click Update..

24-Port 10/100 + 4-Port Gigabit Switch with WebView and Power over Ethernet 48