Chapter 5

Configuring the Switch

Event Description  A text comment that describes the entry in the Event Setting Table..

Type  The type of action that is taken for an alarm.. This can be None, Log, Trap, or Log and Trap..

Community  The SNMP community name that a trap manager must use to receive trap messages..

Owner  The name of the person who created this entry in the Event Setting Table.. (Maximum 127 characters)..

Click on the Add button to add an Event index entry to the table..

To display each time an event was triggered by an alarm, first highlight an entry in the Event Control Table and then click on the View Log Table button.. The Log Table shows the log index number, the time of an event, and the description of the event that activated the entry..

Statistics > Port Utilization

Statistics > Port Utilization

Displays the percentage of bandwidth currently utilized on each port of the Switch..

Statistics > 802.1x Statistics

Statistics > 802..1x Statistics

The Switch can display statistics for 802..1X protocol exchanges for any port..

To view the statistics for a port, select the required interface from the drop-down menu and click Query..

To set a refresh rate for updating the 802..1X statistics, select a time interval from the Refresh Rate drop-down menu..

ACL

Access Control Lists (ACL) provide packet filtering for IP frames (based on address, protocol, Layer 4 protocol port number or TCP control code) or any frames (based on MAC address or Ethernet type).. To filter incoming packets, first create an access list, add the required rules, specify a mask to modify the precedence in which the rules are checked, and then bind the list to a specific port..

24-Port 10/100 + 4-Port Gigabit Switch with WebView and Power over Ethernet

24

Page 28
Image 28
Linksys SRW224G4P manual Statistics Port Utilization, Statistics 802.1x Statistics