![](/images/new-backgrounds/1120837/12083751x1.webp)
Management Interface | Example MIB Operations |
|
|
The following table describes the standard CLM MIB tables and objects that are not implemented by Availability Service.
Table 2-4 SAF-CLM-MIB
MIB Table ID/Object ID | Description |
|
|
saClmServiceState | This CLM scalar is not supported |
|
|
saClmNodeAddressType mib object | Not Supported |
|
|
saClmNodeAddress mib object | Not Supported |
|
|
saClmNodeHPIEntityPath mib object | Not Supported |
|
|
saClmAlarmServiceImpaired | Not Supported |
|
|
saClmStateChgClusterNodeReconfigured | Not Supported |
|
|
2.2.5Example MIB Operations
This section describes the steps required to completely uninstall an application component on a sample node and then install it again.
Uninstalling an Application Component on a Sample Node
To uninstall all application SUs from a node, take the steps below.
Assume there is only one application SU (safSu=Su_app,safNode=PL_2_2) and only one application component on the node (safComp=Comp_app, safSu=Su_app,safNode=PL_2_2).
1.Perform an SNMP Set of
”safSu=Su_app,safNode=PL_2_2”, object saAmfSUAdminState value= locked(1).
2.Perform an SNMP Set of
3.Perform an SNMP Set of
4.Perform an SNMP Set of
5.Perform an SNMP Set of
After this, the application can be uninstalled from the node.
26 | Availability Service Programmer’s Reference (6806800C44B) |