Management Interface
2
2.1Overview
The Availability Service is configured using SNMP or XML. Runtime administrative operations are performed using SNMP or CLI.
2.2Management Information Base (MIB)
This section provides information about two standard MIBs
2.2.1NCS-AVSV-MIB
This proprietary MIB contains managed object definitions for NCS Availability Service. This MIB contains NCS enhancements beyond the SAF AMF and CLM MIBs. The MIB is in the development tar installation directory.
The following table describes the objects and traps supported by this MIB.
Table 2-1 NCS-AVSV-MIB
MIB Table ID\Trap ID | Description |
|
|
Scalar objects | ncsAvDHeartbeatSendInt and ncsAvDHeartbeatDownInt are |
| configuration objects used for heartbeating between the AvSv’s distributed |
| entities. The ncsCLAdminState object is not currently supported. |
ncsNDTable | This table contains the proprietary configuration required for the node.The |
| ncsNDNodeId in this table must be filled for each of the nodes configured |
| in saAmfNodeTable. |
ncsSGTable | This table contains the proprietary configuration required for the SGs |
| specific to the NCS services that are managed by AvSv. |
|
|
ncsSUTable | This table contains the MIB objects through which proprietary admin |
| operations can be performed on the SU. |
|
|
ncsSITable | This table contains the MIB objects through which proprietary admin |
| operations can be performed on the SI. |
|
|
ncsSNDTable | This table contains status information on the cluster nodes. |
|
|
ncsSSUTable | This table contains status information of the SUs. |
|
|
Availability Service Programmer’s Reference (6806800C44B) | 23 |
